Large Ring on a 12 ft 3/4 in Stable Braid Straight Sling
This 12 ft Large X-Rigging ring hand spliced in 3/4 in Stable Braid sling by SHERRILLtree Splicing Department can go from ground level to the crown in you rigging systems. Enjoy the capabilities of a cordage tool without the diameter limitations of whoopie- or loopie-type configurations. Place wherever needed. Use all the sling on large stems, use the extra as a backstay on smaller stems, and increase the load-dispersing capability of the X-Rigging rings. Because this sling is meant to be tied, it can be maneuvered around mid-line to other locations while still on the rigging line. Need to redirect the angle of a pull line on a spar or tree? Looking for a smooth yet nearly indestructible attachment point for a more traditional speedline? Own a GRCS? This sling-and-ring combo is hands down the best tool to lead the rigging line fair into the top of the GRCS or any other ratcheting- or bollard-style lowering device. A basic solution to the complex rigging tasks we face on a regular basis, this sling gives you all that—plus whatever else you can think of! The uses for rigging applications are many. Redirect, fair lead, speedline, you name it. The possibilities are as varied as the gals and guys removing trees! Perhaps its best property is the most subtle one—through the use of strategically placed X-Rigging rings, riggers aloft can devise rigging systems that work with the tree’s natural strength and structure. Rope and rope angles can be managed in and around the tree, in and out of blocks and other rigging points. Weak points can be strengthened or avoided. Loads can be placed in compression on the tree, and trees can be removed safely and effectively. Scannable compatible for track and trace capability
