Climb Right orange 5/8 inch wire core flipline, 15 feet, coiled with steel swivel and double-locking snapOut of Stock

Climb Right Wire Core Flipline, 5/8 in × 15 ft, Steel Swivel Snap

SKU: SP-75016

CA$165.99

Out of stock

Summary

Climb Right 5/8 in × 15 ft wire-core flipline with steel swivel and ANSI double-locking snap. Cut-resistant positioning lanyard, tested to 650 lb. USA.

Description

A wire-core flipline is the traditional positioning lanyard for spur climbing and chainsaw work aloft: a steel cable core inside a rope cover gives the lanyard the stiffness to flip up the trunk ahead of you and resists an accidental saw contact far better than rope alone. This Climb Right flipline is 5/8 in (16 mm) in diameter and 15 ft (4.6 m) long, with a steel swivel at one end and an ANSI double-locking steel snap at the other, so it clips straight to a saddle D-ring and will not twist.

Spyder Manufacturing of Placentia, California builds Climb Right wire-core fliplines in the USA. Each flipline is assembled with double hydraulic crimps and ANSI-rated double-locking steel swivel snaps, and every finished lanyard is individually load tested to 650 lb before it ships. The rope cover is orange for visibility against bark. Pair it with a rope grab or Prusik adjuster (sold separately) to set the working length.

Product features

  • Diameter:  5/8 in (16 mm)
  • Length:  15 ft (4.6 m)
  • Core:  steel wire cable, cut resistant
  • Hardware:  steel swivel and ANSI double-locking steel snap, double hydraulic crimps
  • Testing:  every lanyard individually load tested to 650 lb
  • Colour:  orange
  • Adjuster:  use with a rope grab or Prusik adjuster (sold separately)
  • Safety:  inspect before every use; a wire-core flipline is a work-positioning lanyard, not a fall-arrest device, and must be used with a second attachment when cutting
  • Made in:  USA