
Notch 1/2 in Wire-Core 2-N-1 Lanyard with Steel Snaps, 10 ft
SKU: ST-29106Barcode: 855604006664
Summary
3 m (10 ft) 13 mm (1/2 in) wire-core 2-N-1 lanyard with steel snaps at both ends and a hip prusik with aluminum locking snap. USA made by Rope Logic.
Brand
Categories
Types
Description
The classic wire-core 2-N-1 lanyard from Rope Logic: 10 ft of 1/2 in (13 mm) rope-jacketed steel cable with a steel snap swaged to each end and a hip prusik with a single-locking aluminum snap for adjustment. The terminations are hydraulically pressed inside steel sleeves that retain about 100% of the wire's rated strength.
A 2-N-1 lanyard has a locking snap at each end, so the climber can work either side of the lanyard, pass it over limbs one end at a time and stay connected throughout. The hip prusik on the standing part gives a second point of adjustment. Wire-core fliplines have a steel cable inside a rope jacket, which gives the stiffness that makes flipping the line around the stem easy and adds resistance to cuts from a handsaw. The swaged terminations are formed by Rope Logic's process, which captures both the wire core and the rope jacket so no wire is exposed and there is no metal-on-metal wear. Note that no flipline is chainsaw proof; a running saw will sever any lanyard.
Product features
- Type: wire-core 2-N-1 work-positioning lanyard
- Length: 3 m (10 ft)
- Diameter: 13 mm (1/2 in)
- Core: steel wire, hydraulically swaged terminations
- Snaps: steel, both ends
- Adjuster: hip prusik with aluminum locking snap
- Note: not chainsaw proof
- Made in: USA (Rope Logic)
You may also like


































